Present to you all the Pratt & Whitney 1100-G Engine for the FFA320, Toliss A319 and A321
Fully Animated Interior/Exterior Reverse's with Custom Particles in icing conditions and reverse thrust particle effects.
This has 2 types of quality texturing, it has a High Quality texture mode - 4K Textures, and a lower quality 2K Texture Mod.
This is a Visual Mod only, there is no change to performance in this mod, you will still get the same performance you would using the CFM/IAE Engines, If your using the Toliss with this mod, I would suggest making sure it is set to CFM not IAE so you will get the "N1" on the ECAM rather than the "EPR"
V.1.3.1
- Air Inlet Cowling Model Slightly edited to be more round and little lip on the bottom.
- Update to textures in multiple areas;
- Cowling - Dirt/Grim and the bottom of the cowlings
- Modified the Pylon Textures - Colour of parts and Dirt/Grim
- PBRs also updated to add to texture changes
- (A321/A319) Modified the Particles for lower temperature condensation out of the Pylons
- (A321) Manual updated to provide instructions on how to install the PWs in a way that can be used with the default Toliss LEAP/IAE/CFM engines or with my LEAP Engine Mod.
- Texture Format Updated to fit with 11.50 Recommendations all textures now us .dds format
- 2K Version has been removed as Vulkan now handles quality of textures.
- Paintkit also Updated to reflect Changes.
- Fixed Missing updated Manual for A321 - Please redownload the 321 mod zip file.
V.1.2.0
- Better Exhaust Textures including the Missing Pressure Relief Door on each side of the engine.
- Including correct texturing of each side of the exhaust of the engine exhaust.
- Updated Textures of the Engine Cowling;
- Removed the black Hoist Point Replaced them with proper crew textures.
- Added more accurate worded text on the cowling.
- Added more accurate textures to the bottom of the Cowling around the Cowling Latches
- Updated the Textures on the bottom interior of the reverser cowling below the Engine Exhaust.
- Fixed the Hot Air Outlets location, added dirt textures to the outlets.
- Added Text textures to the Fan Blades to me accurate to what you would see on the PW Engines.
- Adding Panel Number to the Engine Pylons and change some of colour to the ring/cushion between the pylon and wing model.
- Added in Oil Drop Models to the bottom of the engines and the engine exhaust.
إرسال تعليق