Link Update! MSFS2020 - FPS Increasement Mod - Lower 2D Instrument Refresh Rate - V.1.1.5



Version.1.1.5

Updated for Game Version 1.10.7. Extract "FPS-Fix" sub-folder into Community.

Version 1.1.4.1a

Updated for Game Version 1.9.3. Set Glass Cockpit Refresh Rate in Graphics Option to HIGH to enable. By Default, Reduces the in-game display frame rate, configurable per aircraft. See the readme for more information.

Version 1.1.4

Updated for Game Version 1.8.3. Set Glass Cockpit Refresh Rate in Graphics Option to HIGH to enable. By Default, Reduces the in-game display frame rate, configurable per aircraft. See the readme for more information.

Unzip and install the FPS-Fix directory in your Community folder. DO NOT REPLACE THE BASE GAME FILES.

Your community directory by default is located in C:\Users\[YOUR USERNAME]\AppData\Roaming\Microsoft Flight Simulator\Packages\Community

If you changed this location during installation, you will not see any files in ..\Packages and will have to find your Community folder.

Open your game and enable Developer Mode (In Settings > Developer). This will enable the developer menu.

From the developer menu at the top of the screen, go to Tools > Virtual File System.

Expand the Watched Bases tab. This is your Community folder, where the mod must be installed to.

Usage:

Important as of V1.1.4a / Game Version v1.8.3 - Set Glass Cockpit Refresh Rate to HIGH. Setting this to MEDIUM or LOW will overwrite the mod's setting (and this is intentional). If you wish to use the mod, please set this to High. The game's inbuilt FPS reduction applies on a global setting, the mod allows you to set this value per aircraft in freeflight mode.

By default, the default refresh settings are as listed.

You can change this per airplane in the Flight Settings > FPS > Display Refresh options menu before you begin your flight. (Currently this read-only, you can modify it with a text editor but saving settings in game is not supported yet)

Note that Very Low is a demonstration mode to simply make it obvious that the mod is actually doing something. It's not recommendeed and the recommended setting for most users is HIGH.

ULTRA will completely disable the refresh rate modification and revert to vanilla behaviour.

Default Settings:

Unlisted - Ultra

A320neo - High

747-8 Intercontinental - Medium

787-10 Dreamliner - Medium

Cessna Citation CJ4 - Medium

Cessna Citation Longitude - Medium

TBM 930 - High

Beechcraft King Air 350i - High

Cessna 172 Skyhawk (G1000) - High

Cessna 208 B Grand Caravan EX - High

SR22 - High

X Cub - High

DA40 NG - High

DA40 TDI - High

DA62 - High

DV20 - High

EXTRA 330LT - High

Flight Design CTSL - High

A5 - High

VL-3 - High

Virus SW121 - High

Cap10 - High

Beechcraft Baron G58 - High

Beechcraft Bonanza G36 - High

Shock Ultra - Ultra

Pitts Special S2S - Ultra

Cessna 152 - Ultra

Cessna 152 Aerobat - Ultra

Cessna 172 Skyhawk - Ultra

Savage Cub - Ultra

Version.1.1.5


8/Post a Comment/Comments

  1. When you enable this mod, the VFRmap is freezing and became unusable.
    I delete this mod and VFRmap is working again.

    ReplyDelete
  2. dont work with 787. black screens v 1.1.4

    ReplyDelete
  3. а где ссылки на скачивание?

    ReplyDelete
  4. Where can I Download this file?

    ReplyDelete
    Replies
    1. The download link has been corrected. Thanks for information.

      Delete
  5. Sorry but not work, with A320 FBW and C152. Panels disappears. (R71800X-GTX1080ti-32ram- ssd 1T)

    ReplyDelete
  6. I loaded into the flight simulator, and I saw it. I got out the FBW A32NX and spawned in with high and high glass cockpit refresh rate. I waited over 2 hours and the bar was full, yet it wouldn't load. Is there some bug, or am I doing something wrong?

    ReplyDelete

Post a Comment

Previous Post Next Post
Facebook Page Follow

Ads